Boil Water Announcements
Discontinued Boil Water Announcements
If You Receive a Boil Water Notice:
Usually, Boil Water Notices are issued because of a pipe break that causes the water system to lose pressure. Most pipe breaks are due to development or construction projects. There is a possibility that low water pressure inside the pipes could allow contaminants to enter.
How Will We Let You Know?
We use some or all of the following notification methods, depending on the size of the affected area. We hand deliver notices door to door, or leave a small sign near the driveway, as well as post large signs at entrances to the affected area. Local newspapers, radio, and television stations are notified, and announcements are posted on this web page. We also notify the local health department and Florida Department of Environmental Protection with every occurrence.
What is the Health Concern?
It is possible that there are harmful bacteria in the water after a pressure loss. Although waterborne diseases are extremely rare, they can be serious. The risk is higher for infants, the elderly, and persons with immune deficiency disorders.
What Do You Do?
Disinfect water used for drinking (including pets!), cooking, brushing teeth, rinsing contact lenses, shaving, and making ice. Use one of the following methods:
Water does not need to be disinfected for bathing, showering, or laundry. Dishes can be washed as long as you can use hot water, otherwise disinfect.
What Do We Do?
Our water systems are monitored 24/7/365, and our Maintenance Section is constantly staffed to handle any pipe breaks. Repairing pipe breaks is their highest priority. Following repair, we flush the water system to ensure water quality, and then take bacteriological samples over a 48 hour period. The lab results are reviewed, and we then issue a Discontinue Boil Water Notice using the same methods listed above.
What Do You Do After the Discontinue Boil Water Notice?
Flush the water out of your distribution lines. Start with an outdoor faucet furthest from your meter and flush all outdoor faucets. Run hot water through each indoor faucet until you notice a change in water temperature. Remove the aerator before flushing kitchen and bathroom sink faucets. Run enough hot water to flush the hot water heater.
If you have an automatic ice maker, empty the ice tray several times to ensure that the line to the ice maker is flushed.
If Water Service is Disrupted for More than 12 Hours
Turn off all appliances that draw water, such as ice makers, hot water heaters, heat pumps, etc., to prevent damage.
Your water heater is a potential source of drinking and cooking water if you have not used hot water since the pipe break. Turn off the incoming water valve and power to the water heater. Water may be drawn through the valve at the bottom of the heater. When water service is restored, make sure the tank has refilled before restoring power to the heater.
Do not use swimming pool water for drinking or cooking.
If your toilet works, but you do not have running water to refill the tank, use pool water or other non-disinfected water, and minimize flushing. If there is no way to refill the tank, you can line the toilet with a plastic garbage bag. After use, tie the bag tightly and store in a secure container, such as a garbage can with a tight lid, for later disposal.
How Can You Contact Us?
Our Billing Office will set up a phone message with continuously updated information on boil water notices. Call 407-665-2110. If you have additional questions after the message plays, the phone will ring through to the customer service staff. After business hours, call 407-665-2767.